Single Pattress Box
A single pattress box is the back box behind a single wall accessory, such as a single socket, a light switch or a single face plate. It holds the cable ends and gives the plate a firm fixing. It is the most common box on electrical and network jobs in homes and offices in Kenya.
- Back box for single sockets, switches and face plates
- Holds and protects cable ends
- Firm fixing for the accessory
- Suits power, lighting and data points
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A single pattress box is the box that sits behind a single wall accessory. A light switch, a single socket or a single face plate screws onto it, and the box encloses the cable ends behind the plate. It is the box you will fit more often than any other, because most switch and outlet positions take one accessory.
What it is for
- Mounting a single socket for one appliance
- Mounting a light switch or fused spur
- Mounting a single face plate for a network or other outlet point
- Enclosing a cable joint or break-out point, closed with a blank cover
On CCTV and network jobs in Nairobi, single boxes are used for camera and access point break-out points, for the power point that feeds a camera power supply in a ceiling space, and for single network points at desks.
Surface or flush mounting
Surface boxes fix onto the wall and are the quick choice when cables run in trunking or conduit, as when adding points to a finished building. Flush boxes are recessed into a chase in the wall and are usually fitted during construction, with the cable buried in the wall. Pick the style that matches how the cable reaches the point.
Installation and setup
- Mark the box position, keeping it level and at a consistent height with other points in the room.
- Open only the knockouts you need for cable entry.
- Fix the box with plugs and screws that suit the wall material.
- Leave a little cable slack inside, fit the accessory and screw it to the box.
Mains wiring must be done by a qualified electrician with the circuit isolated at the consumer unit. Data outlets on low-voltage cable can be fitted by your network installer.
Keep spare boxes on hand
Installers often keep a few single boxes in the van, because an extra break-out or junction point is a common need on site, particularly when rerouting cables around obstacles.
What you need with it
- A single accessory: socket, switch, face plate or blank cover
- Wall plugs and screws
- Trunking or conduit for surface runs
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What fits a single pattress box?
Single accessories such as a light switch, a single socket, a fused spur or a single face plate. A blank cover can also close the box if it is used as a junction or future point. Double accessories need a double box, so check the plate size before you buy.
How deep should the box be?
Deep enough for the body of the accessory and the cables behind it without forcing anything. Sockets and some data modules need more depth than a plain switch. If cables are pressed hard against terminals or modules, choose a deeper box. Bring the accessory to the shop and we can help you match it.
Can I use a pattress box as a junction box?
Yes, a pattress box closed with a blank cover can house a cable joint, provided the joint is made with proper connectors and the box stays accessible. Do not bury joints in walls or ceilings where nobody can reach them later.