SKU KCS-PATTRESS-COVER-SINGLE

Single Pattress Box Cover

KSh 100
In stock — pick up today in Nairobi CBD

A single pattress box cover closes off a single pattress box that has no switch, socket or face plate fitted. It is the usual finish for junction points and spare outlet positions, keeping cable ends enclosed and the wall tidy in homes, shops and offices in Kenya.

  • Closes a single pattress box with no accessory
  • Ideal finish for small junction points
  • Keeps cable ends enclosed and tidy
  • Removable for maintenance and fault-finding
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A single pattress box cover is the plain plate that closes a single pattress box with nothing else fitted to it. Small single boxes are the ones most often used as junction points along a cable run, so this is the cover installers reach for most when a box needs closing rather than an accessory.

Typical uses

  • Closing a junction box on a lighting or socket circuit, with joints made in proper connectors
  • Finishing a break-out point where a CCTV camera cable or power lead leaves a wall or ceiling
  • Covering a spare point where a cable has been left for a future switch or outlet
  • Making a box safe where a single socket or switch has been taken out

On CCTV jobs around Nairobi, a single covered box near a camera often houses the joint between the camera's power lead and the supply cable, so it is protected but still reachable when the camera needs service.

Indoors and outdoors

A cover on its own keeps a box closed and tidy, but it is made for indoor boxes. For joints exposed to rain, such as near outdoor cameras on a wall or at a gate, use an enclosure made for outdoor use instead, or keep the box under a roof overhang where it stays dry.

Installation and setup

  • Make sure every joint inside uses a proper connector, with no bare conductor showing.
  • For mains wiring, the work must be done by a qualified electrician with the circuit switched off.
  • Fold cables neatly into the box so the cover sits flat.
  • Fix the cover with screws through the box's fixing holes.

Keep a record

Write down what each covered box contains, or mark the cover discreetly. Covered junction points are easy to forget, and a record saves time when tracing a fault later.

What you need with it

  • A single pattress box, surface or flush
  • Proper connectors for any joints
  • Fixing screws, if the box does not include them

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

When should I use a single box cover instead of a switch or socket?

Use it when the box holds cable joints or is waiting for a future accessory. Junction points on lighting circuits and camera power joints are common examples. Fitting a cover keeps the box safe and tidy, and it can be swapped for a switch or socket later without changing the box.

Is a covered pattress box suitable outdoors?

A standard cover on an indoor box is not meant for exposure to rain. Outdoor joints near cameras, gates or garden lights should go in an enclosure designed for outdoor use, or be kept under cover where they stay dry. Water in a joint causes faults and can be dangerous on mains circuits.

Does the cover fit any single box?

It is made for single pattress boxes, but box styles and fixing hole positions vary. Check that the cover lines up with the fixing holes on your box. Bring the box, or a photo with measurements, to the shop if you want our team to confirm the fit.

KSh 100 In stock