SKU KCS-FACEPLATE-SINGLE

Single Face Plate

KSh 150
In stock — pick up today in Nairobi CBD

A single face plate finishes a wall outlet that needs one connection, giving the cable end a neat, fixed point. It fits over a pattress box and suits places where only one device connects, such as a ceiling access point, an IP camera position or a single desk in a Kenyan home or office.

  • One connection point on a compact plate
  • Neat finish for a single cable
  • Fits over a matching pattress box
  • Suits access points, cameras and single devices
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A single face plate is the plate that finishes a wall outlet with one connection point. It is fitted over a pattress box and holds the outlet module, so the cable inside the wall ends in a tidy socket instead of a loose lead. Choose the single version where only one device will connect at that spot.

Where a single point is enough

Not every location needs two connections. A single point keeps the wall plate small and the job simple, and it suits:

  • A Wi-Fi access point on a ceiling or high on a wall
  • An IP camera position, where the cable needs to break out near the camera
  • A printer, smart TV or single computer
  • A connection point in a store room, guard house or gate cabin

In IP CCTV work around Nairobi, installers often end a cable at a single wall point near the camera and use a short patch lead to the camera itself. If the camera is ever replaced, only the patch lead changes, not the long cable back to the switch.

Installation and setup

  • Fit a single pattress box, surface-mounted or recessed, at the outlet position.
  • Bring the cable into the box with a little slack behind the plate.
  • Terminate the cable on the outlet module using the same wiring standard as the other end.
  • Clip the module into the plate and screw it to the box without pinching the cable.
  • Test the cable end to end with a cable tester before connecting equipment.

A tip on planning

If there is any chance you will need a second device at the same spot, such as a TV and a streaming box, consider a double plate and two cables instead. Pulling an extra cable now is far easier than later.

What you need with it

  • A single pattress box that matches the plate
  • An outlet module for the connection, such as an RJ45 data module
  • Network cable and a termination tool
  • A patch lead from the plate to the device

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

Where should I use a single face plate?

Use it where only one device will ever connect, such as a ceiling Wi-Fi access point, an IP camera break-out point, a printer or one computer. It keeps the wall neat and takes a smaller box. For a desk or TV wall with several devices, a double plate is usually the better choice.

Can I fit it on a surface box?

Yes, as long as the box matches the plate size. Surface pattress boxes are used where cables run in trunking or conduit on the wall, which is common when adding network points to an existing building. Flush boxes are recessed into the wall and are usually fitted during construction or renovation.

Why end a camera cable at a face plate instead of plugging it straight in?

A wall point protects the long cable in the wall. The camera connects with a short patch lead, so if the camera or lead is damaged or replaced, you only change the short lead. It also makes testing easier, because you can check the cable at the plate.

KSh 150 In stock