PVC Insulating Tape
PVC insulating tape is the stretchy electrical tape used to insulate and protect wire joints, bundle cables and mark conductors. Electricians and CCTV installers in Kenya keep a roll in every toolbag for camera power joints, cable repairs and tidy finishing.
- Stretchy tape for insulating wire joints
- Bundles and marks cables neatly
- Useful on camera power joints
- Toolbag essential for electrical and CCTV work
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
PVC insulating tape is the flexible, stretchy tape used on electrical work to cover joints, protect insulation and keep cables tidy. It sticks to itself and to cable sheaths, and its stretch lets it wrap closely around a joint. Every electrician and CCTV installer in Kenya carries at least one roll.
What it is used for
- Insulating low-voltage joints, such as camera power leads joined to supply cable
- Adding an extra protective layer over a properly made joint
- Bundling cables together at the back of a recorder or cabinet
- Marking cable ends with coloured tape so runs can be identified
- Covering minor nicks in an outer sheath while a cable is being replaced
What it should not replace
Tape is a finishing and insulating material, not a connector. Mains joints should be made with proper terminals or connectors inside an accessible box, with tape only as an extra layer if needed. Outdoors, tape alone does not keep water out of a joint for long, so put outdoor joints inside an enclosure or a camera junction box.
How to wrap a joint properly
- Make sure the joint itself is mechanically sound before taping.
- Start on the cable sheath a little way back from the joint.
- Stretch the tape slightly as you wind, overlapping each turn by about half its width.
- Continue past the joint onto the sheath on the other side.
- Finish without stretching the last turn, so the end does not lift.
Heat and sunlight
PVC tape can soften and lose its grip in direct sun or in a hot roof space over time. Keep taped joints out of the sun where possible, and check old joints when servicing a system.
What you need with it
- Cable connectors or terminal blocks for the joints themselves
- A junction box for outdoor or concealed joints
- Cable ties for bundling large looms
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Can I join wires with just insulating tape?
For low-voltage camera power joints, a twisted joint wrapped well in tape is common, but a proper connector is more reliable. For mains wiring, always use proper connectors or terminals inside an accessible box. Tape alone can loosen over time, especially in heat, which can lead to faults.
Is PVC tape suitable outdoors?
It can be used as an extra layer outdoors, but tape alone will not keep rain out of a joint for long and can lose its grip in strong sun. For joints near outdoor cameras, use a junction box or a weather-protected enclosure, and use tape inside it for insulation and tidiness.
Why do installers use different colours of tape?
Coloured tape is a quick way to mark cables. Installers wrap a band of colour at both ends of a cable so they can match runs, or mark the positive conductor on a power pair. Pick colours that stand out against the cable sheath so the marks are easy to read.