Power Cable 1.5 m
This 1.5m power cable is a mains lead for equipment that takes a detachable power cord, such as a monitor, computer, recorder or UPS. At 1.5 metres it reaches a nearby socket without a long coil of spare cable, which suits desks, shelves and cabinets in Kenyan homes and offices.
- Mains power lead, 1.5 m long
- Suits equipment close to a socket
- For monitors, recorders, computers and UPS units
- Avoids excess cable coiled behind equipment
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
This 1.5m power cable is a replacement or spare mains lead for equipment with a detachable power cord. It is useful when a lead has been lost, damaged or left behind after a move, and when a new piece of equipment arrives without a lead to suit the local socket.
What the 1.5 m length suits
One and a half metres is a short, tidy length. It reaches from a shelf, desk or cabinet to a socket nearby without leaving a long coil of extra cable behind the equipment. That makes it a good fit for:
- A CCTV monitor or recorder on a shelf next to a socket
- A computer or screen on a desk with a socket close by
- Equipment inside a cabinet fed from a PDU or extension in the same cabinet
- A UPS or printer placed beside a wall outlet
If the socket is further away, use a longer lead or a proper extension rather than stretching a short cable tight. A cable under tension can pull out of the equipment or strain its plug.
Check the connector before you buy
Detachable power cords use different connectors at the equipment end. Computers, monitors and many recorders use a three-pin socket often called a kettle-style connector, while some smaller devices use a two-pin figure-eight connector. Look at the power inlet on your equipment, or bring the device or a photo of it, so the cable matches.
Using it safely
- Push the connector fully into the equipment and the plug fully into the socket.
- Do not run the cable under rugs or through doors where it can be crushed.
- Stop using any lead with a cracked plug, exposed conductors or scorch marks.
- If the plug holds a fuse, replace it only with one of the same rating.
Sensitive equipment, such as a CCTV recorder, is better protected if the cable is plugged into a UPS or voltage protector rather than straight into the wall.
What you need with it
- Equipment with a matching power inlet
- A nearby socket, PDU or UPS outlet
- Cable ties or clips to keep the lead tidy
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Will this power cable fit my recorder or monitor?
It will fit if the connector at the equipment end matches the power inlet on your device. Many monitors, computers and recorders use a three-pin kettle-style inlet, while some small devices use a two-pin figure-eight inlet, and some recorders use an external adapter instead. Check the inlet or bring a photo.
Is 1.5 m long enough?
It is long enough when the equipment sits close to the socket, such as on a shelf, desk or inside a cabinet with a power strip. If the socket is across a room or behind furniture, choose a longer lead or a proper extension so the cable is never pulled tight.
Can I use it to replace a damaged lead?
Yes, if the connectors match the old lead. A damaged power lead with cracked insulation or a broken plug should be replaced, not taped up. Unplug the old lead from the wall first, then from the equipment, and fit the new one before switching the equipment back on.