

High-Tensile Electric Fence Wire (Roll)
High-tensile electric fence wire is a strong conductive wire that resists stretching and sagging. Sold by the roll, it is used for long fence lines on farms and for boundary and perimeter fences in Kenya, where the wire must stay tight to work effectively.
- High-tensile wire resists stretching
- Stays tight on long fence lines
- Conducts current along the fence
- Sold by the roll
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
High-tensile electric fence wire is a strong, conductive wire for the live strands of an electric fence. Its high tensile strength lets it be pulled tight over long distances without stretching or sagging, which makes it useful for farm boundaries, livestock enclosures and long perimeter fences in Kenya. It is sold by the roll so you can buy for the full length of your fence.
Why use high-tensile wire
- Resists stretching: the wire stays tight over time.
- Conducts well: the current runs along the whole length of the fence.
- Suits long runs: fewer posts are needed than with weaker wire.
- Consistent tension: important for effective animal containment and security.
Planning your fence
Measure the fence length and multiply by the number of strands you plan to run, then allow extra for corners, gates and wastage. Wire height and spacing depend on what you are protecting: livestock, wildlife or a perimeter wall. Use insulators on every post and brace corner and end posts well, since all the wire tension is carried there.
Installation tips
- Unroll the wire carefully from the roll to avoid kinks, which are weak points.
- Fix one end to a strong end post, run the wire through the insulators and pull it tight with a strainer.
- Keep wire away from vegetation, metal and posts that could earth it.
- Use proper connectors for joins and test the voltage along the line with a fence tester.
- Wear gloves, since cut wire ends can be sharp.
Measure twice and buy a little extra for corners, joins and repairs.
For a fence on a wall or around a property, Kefa Solutions technicians can install electric fences and test them. If you install it yourself, switch off the energiser before touching any wire.
Buying in Kenya
You can collect this item from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD. We deliver within Nairobi (up to 45 km) and send by courier across Kenya, normally in 1 to 3 working days.
Frequently asked questions
What does high-tensile mean?
High-tensile means the wire has high tensile strength, so it can be pulled tight without stretching or snapping and keeps its tension over time. That helps long fence lines stay straight and reduces sagging between posts. Check this before you buy so the unit suits your setup.
How tight should the wire be?
Tight enough to avoid sagging between posts, but not so tight that it breaks in cold weather or deforms posts. Use proper strainers or tensioners, tension each strand evenly and check it after the first weeks, when the wire settles.
Can I join two pieces of wire?
Yes, but joins should be made with proper line joiners or a good, tight knot that keeps electrical contact. Poor joints cause voltage drops and hot spots. Keep joints few and check them during fence inspections. It is worth testing this once everything is installed.
What do I need besides the wire?
You need posts, insulators, strainers or tensioners, an energiser, earth stakes and warning signs, and a voltage tester. Match the insulators to the wire size, because wire diameter changes which insulator fits. Plan the position before you fix anything in place. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock.





