Fridge Guard Voltage Protector
A fridge guard is a plug-in voltage protector for fridges and freezers. It disconnects the appliance when mains voltage is too high or too low and waits before reconnecting after a power cut, which protects the compressor. It suits homes, shops and kiosks in Kenya where outages and voltage swings are common.
- Cuts power when mains voltage is unsafe
- Delays restart after a power cut
- Protects the fridge compressor
- Plug-in fit, no wiring needed
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A fridge guard is a plug-in voltage protector made for refrigeration appliances. It sits between the wall socket and the fridge, watches the incoming mains supply, and only passes power when the voltage is within a safe range. After a power cut it waits before switching the fridge back on, which is what makes it different from a simple adaptor.
Why fridges need protection
The compressor is the costliest part of a fridge to repair. It is at risk in three situations that are common in Kenya:
- Low voltage, when the compressor struggles to start and overheats
- High voltage or surges, which stress the motor and the electronics
- Quick restarts, when power drops and returns within moments while the gas pressures inside the system are still high
The restart delay handles the last one. By holding the fridge off for a while after power returns, the guard lets the pressures in the system settle, so the compressor starts against a lighter load.
Where to use it
- Household fridges and freezers
- Display fridges and chest freezers in shops, butcheries and kiosks
- Water dispensers with cooling units
- Fridges in staff quarters, guard houses and site offices
Installation and setup
Plug the fridge guard into the wall socket and plug the fridge into the guard. There is nothing to wire. After a power cut, expect the fridge to stay off for a short time before it starts; this is the guard doing its job, not a fault. Avoid feeding the guard from a long, thin extension lead, which can itself cause low voltage at the fridge.
Check the rating
Large fridges and chest freezers draw a high current for a moment when the compressor starts. Make sure the guard is rated for the size of appliance you are connecting.
What you need with it
- A wall socket close to the fridge, ideally one not shared with heavy appliances
- A separate TV or electronics guard for the TV, decoder and sound system
A fridge guard protects against bad supply but does not keep the fridge running during an outage. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Why does my fridge stay off for a while after the power comes back?
That is the restart delay built into a fridge guard. After an outage it waits before reconnecting, so the pressures in the cooling system settle and the compressor does not start under strain. Food stays cold during this short wait as long as the door is kept closed.
Can I use a fridge guard on a chest freezer or display fridge?
Yes, a fridge guard is made for compressor appliances like these. Larger units draw a bigger starting current, so check that the guard is rated for the appliance you are connecting. Our team can help you match the guard to the fridge or freezer.
Can I use a fridge guard for my TV?
It can protect a TV from unsafe voltage, but its restart delay is set for compressors and is longer than a TV needs. A TV guard is made for electronics such as TVs, decoders and DVD players and is the better choice for them. Keep the fridge guard for the fridge.
Is a fridge guard the same as a stabiliser?
No. A fridge guard does not correct the voltage; it simply disconnects the fridge when voltage is outside a safe range and reconnects when it is safe again. A stabiliser adjusts the voltage to keep equipment running. For most homes and shops, a fridge guard is the simple way to protect a fridge.