Double Pattress Box Cover
A double pattress box cover closes off a double pattress box that has no socket, switch or face plate fitted. It keeps cable ends and joints enclosed and the wall looking finished. Installers in Kenya use it on junction points, future outlet positions and points left after equipment is moved.
- Closes a double pattress box with no accessory
- Keeps cable joints enclosed and safe
- Finished look for unused points
- Easy to remove for later work
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A double pattress box cover is the plain plate that closes a double pattress box when no socket, switch or face plate is fitted. It keeps cable ends, joints and terminals out of reach and out of the dust, and gives the wall a finished look instead of an open box.
When you need one
Not every box on a job ends up with an accessory on it. A cover is the right finish when:
- The box is a junction point where cables are joined with proper connectors
- Cables have been pulled to a position for future use, such as a planned TV wall or recorder point
- A double socket or face plate has been removed and the point is no longer needed
- Work is paused and an open box needs to be closed safely until the accessory is fitted
On CCTV and network jobs in Nairobi, covered boxes are often used where camera power supplies or cables break out in a ceiling or along a wall, so the joint stays reachable for maintenance.
Why close every box
An open box is a risk. Live conductors can be touched, dust and insects get in, and cable ends can be pulled loose. A covered box is safe, tidy and easy to find again when you come back to add the outlet. Mark the cover or keep a note of what the box contains, so the next person knows what they are opening.
Installation and setup
- Make sure any cables inside are terminated in proper connectors, or insulated and secured.
- For mains circuits, have a qualified electrician make the box safe with the supply off.
- Tuck the cables neatly so nothing is pinched by the cover.
- Screw the cover to the box using the box's fixing holes.
Matching the box
The cover must match the size of a double box and line up with its fixing holes. If your box is an older or unusual type, bring a photo or the box itself to the shop to check the fit.
What you need with it
- A double pattress box, surface or flush
- Proper cable connectors for any joints inside
- Fixing screws, if the box does not include them
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What is a pattress box cover for?
It closes a pattress box that has no socket, switch or face plate fitted. This is common at junction points, at outlet positions prepared for future use, and where an accessory has been removed. The cover keeps fingers, dust and insects away from cable ends and keeps the wall tidy.
Will it fit my double box?
It is made for a double pattress box, so it needs to match the box size and fixing hole positions. Most problems come from mixing different box styles. If you are not sure, bring the box or a clear photo with measurements to the shop so our team can check the fit before you buy.
Can I leave cable joints behind a cover?
Yes, if the joints are made with proper connectors and the box stays accessible. Never leave bare or taped-only mains joints, and never cover a box with a plaster finish that hides it. Anyone working on the wiring later must be able to find and open the box.