SKU KCS-FACEPLATE-DOUBLE

Double Face Plate

KSh 200
In stock — pick up today in Nairobi CBD

A double face plate is the front plate of a wall outlet point, made to give two connections side by side. It fits over a pattress box and gives cabling a neat, fixed finish, for example two network points at a desk, behind a TV or beside an NVR in a Kenyan home or office.

  • Two connection points on one wall plate
  • Neat, fixed finish for cabling
  • Fits over a matching pattress box
  • Leaves a spare point for future needs
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A double face plate is the plate you see on the wall where a cable ends and a device plugs in. It is fitted over a pattress box and holds the outlet modules, so instead of a loose cable hanging out of the wall you get a neat, fixed point. The double version is for places where you want two connections side by side, for example two network points from one wall position.

Where a double point makes sense

Many locations need more than one connection, and running a second cable at the start costs far less than adding one later. A double face plate is a good fit when:

  • A desk needs a computer and a second device such as a phone or printer
  • A TV wall needs connections for the smart TV and a streaming box or decoder
  • The recorder position needs links for the NVR and the router or switch
  • You want one point in use and one spare for later

In IP CCTV and office networking in Kenya, cables usually run from a switch or patch panel in a cabinet out to wall points like this. A short patch lead then connects the wall point to the equipment, so the long cable inside the wall is never handled.

Installation and setup

  • Fit a pattress box that matches the plate size, either surface-mounted or recessed into the wall.
  • Bring both cables into the box, leaving a little slack for re-termination.
  • Terminate each cable on its outlet module, following the same wiring standard used at the other end.
  • Clip the modules into the plate, then screw the plate to the box without pinching the cables.
  • Label each outlet and test each cable with a cable tester.

Label both ends of each cable so that anyone working on the system later knows which wall outlet goes to which port on the switch or patch panel.

What you need with it

  • A double pattress box that matches the plate
  • Outlet modules for the connections you need, such as RJ45 data modules
  • Network cable, and a punch-down or termination tool
  • Patch leads from the wall point to your devices

Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

What is a double face plate used for?

It finishes a wall outlet where you want two connections side by side, such as two network points for a desk, a TV wall or the recorder position of a CCTV system. The long cables stay protected in the wall, and devices connect to the plate with short patch leads.

Do I need a pattress box with it?

Yes. A face plate screws onto a pattress box, which holds the cable ends and the outlet modules behind the plate. Use a box that matches the plate size, either a surface box on the wall or a flush box recessed into it. Bring the plate with you if you are unsure which box fits.

Should I choose a single or double face plate?

Choose double where you need two connections now, or one now and a spare for later. A second cable costs little during installation but is much harder to add once walls are finished. A single plate suits points where only one device will ever connect, such as a ceiling access point.

KSh 200 In stock