
Ubiquiti airMAX NanoStation M5 5GHz 16dBi Outdoor CPE NSM5
The Ubiquiti NanoStation M5 (NSM5) is an outdoor 5 GHz airMAX radio with a built-in 14.6–16.1 dBi dual-polarity antenna. In Kenya it is used to link two buildings without cable, to connect a gate house or remote camera point to the main network, and as a customer unit on wireless internet networks. It runs on the included 24 V PoE adapter.
- 14.6–16.1 dBi dual-polarity MIMO antenna built in
- 5 GHz airMAX TDMA radio, up to 27 dBm
- Two 10/100 Ethernet ports
- 24 V passive PoE adapter and pole mount included
- Outdoor rated from -30 °C to 75 °C
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Ubiquiti NanoStation M5 (NSM5) is a compact outdoor radio and antenna in one weatherproof housing. It works in the 5 GHz band with Ubiquiti's airMAX technology, and is used to create wireless links where running a network cable is difficult or too expensive. Typical jobs in Kenya include linking two buildings in a compound, connecting a gate house or warehouse to the office network, and acting as the customer unit for a wireless internet provider.
Key features
- Built-in MIMO antenna: 14.6–16.1 dBi gain, dual-linear polarisation, 43° (H) / 41° (V) beamwidth.
- airMAX TDMA protocol: each client sends and receives in scheduled time slots, which reduces collisions and improves latency and capacity on multi-client networks.
- 5 GHz radio: up to 27 dBm output power, worldwide frequency range 5170–5875 MHz.
- Two Ethernet ports: two 10/100 RJ45 ports; the secondary port has a software-enabled PoE output.
- Simple power: passive 24 V PoE from the included adapter over the network cable, maximum 8 W.
- airOS firmware with the airView spectrum analyser to find a clean channel.
- Outdoor housing: UV-stabilised plastic, rated -30 °C to 75 °C, with a pole-mount kit included.
Where to use it
- Point-to-point links: two NanoStation M5 units can create a wireless bridge between buildings with a clear line of sight.
- CCTV backhaul: carry video from cameras at a gate, car park or remote store back to the NVR in the main building.
- Point-to-multipoint clients: connect sites to an airMAX base station as part of a wider network.
- Farms, schools and estates where trenching cable across open ground is not practical.
Installation and setup
Fix the unit to a pole or mast with the included mount, aim it at the other end of the link, and run one outdoor-rated Cat5e cable down to the PoE adapter indoors. Set up the link in the airOS web interface, choosing access point or station mode and a clear channel. A clear line of sight between the two units is essential, so mount them above trees and roofs where possible.
What you need with it
- A second NanoStation M5 or another 5 GHz airMAX unit for the other end
- Outdoor UV-resistant Cat5e cable and RJ45 connectors
- A pole or wall bracket at each end of the link
- A PoE switch or injector for any IP cameras at the remote end
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Do I need two NanoStation M5 units for a link?
For a point-to-point link between two buildings, yes. One unit is set as the access point and the other as the station, and they talk to each other over 5 GHz. The other end can also be another 5 GHz airMAX device. A single NanoStation M5 can also connect as a client to an existing airMAX base station.
Can I use it to send CCTV video from a gate to the main house?
Yes. Many installers use a pair of NanoStation M5 units to carry IP camera video from a gate, car park or outbuilding back to the NVR. Connect the cameras to a switch at the remote end and plug the switch into the NanoStation. The two units need a clear line of sight to each other.
How is the NanoStation M5 powered?
It uses 24 V passive PoE. The included 24 V, 0.5 A PoE adapter sits indoors and sends power up the same network cable that carries data, so no power socket is needed at the mast. It does not run from a standard 802.3af PoE switch unless you add Ubiquiti's Instant 802.3af adapter, which is sold separately.
What range does it give?
Range depends on line of sight, interference, channel width and the device at the other end, so Ubiquiti does not give one figure for every situation. The 16 dBi antenna and airMAX protocol are built for long-distance outdoor links. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi to help you plan your link distance.




