TP-Link Model TL-SG1210P SKU KCS-TPLINK-TL-SG1210P

TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+ TL-SG1210P

KSh 12,500
In stock — pick up today in Nairobi CBD

The TP-Link TL-SG1210P is a 10-port gigabit unmanaged switch with eight PoE+ ports, made for IP camera systems, Wi-Fi access points and IP phones. It shares a 63 W PoE budget, gives up to 30 W per port, reaches 250 metres in extend mode and restarts frozen cameras automatically. A good fit for Kenyan homes, shops and offices.

  • 8 gigabit PoE+ ports, up to 30 W each
  • 63 W total PoE power budget
  • Extend mode reaches 250 m on ports 1–4
  • PoE auto recovery restarts frozen devices
  • Gigabit RJ45 uplink plus SFP fibre slot
  • Metal fanless case, desk or wall mount
How our CCTV installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 32,350
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The TP-Link 8 port PoE switch TL-SG1210P powers up to eight IP cameras, access points or IP phones over their network cables and connects them at gigabit speed. Two extra uplink ports, one RJ45 and one SFP fibre slot, link it to your NVR, router or main network. It needs no configuration, which makes it a practical choice for CCTV installations in Kenya.

Key features

  • 8 PoE+ ports: IEEE 802.3af/at, up to 30 W on each port.
  • 63 W total PoE budget: enough for several typical fixed IP cameras; if the total is exceeded, lower-priority ports are cut first to protect the switch.
  • Two uplinks: one gigabit RJ45 port and one gigabit SFP slot for fibre.
  • Extend mode: ports 1 to 4 can carry power and data up to 250 metres, at 10 Mbps.
  • PoE auto recovery: detects cameras or access points that stop responding and restarts them.
  • Priority and isolation modes: give ports 1 and 2 priority, or separate traffic between port groups, using front DIP switches.
  • Metal, fanless case: silent, for desk or wall mounting.

Where to use it

Use it to add IP cameras to an NVR that has no PoE ports, to run cameras to a gate or a distant corner of a compound with extend mode, or to power ceiling access points and IP phones in an office. The SFP slot lets you link a remote building back to the main network over fibre with a suitable SFP module. Keep the switch indoors or in a ventilated cabinet, as it is rated for 0 to 40 °C.

Installation and setup

Connect cameras to ports 1 to 8 with Cat5e or Cat6 cable, connect the uplink port to your NVR or router, and plug in the power adapter. The switch detects which devices need PoE and supplies the right power. Use the DIP switches on the front panel only if you need extend, priority, isolation or recovery modes.

What you need with it

  • PoE IP cameras, access points or IP phones (802.3af/at)
  • Cat5e or Cat6 cable and RJ45 connectors
  • An NVR, router or main switch for the uplink
  • An SFP module if you plan a fibre link

Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.

Frequently asked questions

How many IP cameras can the TL-SG1210P power?

It has eight PoE+ ports, so it can power up to eight cameras, as long as their total draw stays within the 63 W PoE budget. Many fixed IP cameras use well under 8 W each, so eight of them usually fit. PTZ cameras and cameras with heaters draw more, so add up their rated power before connecting them.

What is extend mode?

Normal Ethernet runs are limited to 100 metres. When you switch on extend mode, ports 1 to 4 can carry power and data up to 250 metres, but their speed drops to 10 Mbps. That is enough for most single camera streams. TP-Link notes that the actual distance depends on the camera's power use and on cable quality.

Does this switch need configuration?

No. It is an unmanaged switch and works as soon as you connect it. It detects which devices need PoE and powers them automatically. The optional modes, extend, priority, isolation and PoE auto recovery, are turned on with small DIP switches on the front, so there is no software or web page to set up.

Can I use it with an NVR that already has PoE ports?

Yes. Connect the switch's uplink port to the NVR's LAN port or to the same network, then plug extra cameras into the switch. This is useful when the NVR's own PoE ports are full or some cameras are far from the recorder. Check that the NVR has enough free channels for the extra cameras.

KSh 12,500 In stock