
Tenda 5-Port 10/100Mbps Desktop Ethernet Switch S105
The Tenda S105 is a compact 5-port 10/100 Mbps Ethernet switch for adding wired ports to a router at home, in a shop or in a small office in Kenya. It is plug and play with no setup, uses under 1.6 W, and can sit on a desk or be fixed to a wall.
- 5 × 10/100 Mbps RJ45 ports
- Plug and play, no setup needed
- Under 1.6 W power consumption
- Desktop or wall mounting
- Power and Link/Act LEDs on every port
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Tenda 5 port switch S105 is a small, low-power way to add more wired network ports when your router's ports are full. Connect one port to the router and use the other four for a computer, printer, smart TV, DVR or IP camera. There is nothing to configure, so it suits homes, shops and small offices in Kenya that want a quick, simple network expansion.
Key features
- 5 Fast Ethernet ports: 10/100 Mbps auto-negotiation RJ45 ports with auto MDI/MDIX.
- Plug and play: no software, configuration or password.
- Store-and-forward switching: with MAC address auto-learning and auto-aging.
- Status LEDs: one power light and five Link/Act lights.
- Low power: maximum consumption under 1.6 W from a 5 V adapter.
- Small case: 82 × 52 × 22.3 mm, for desktop or wall mounting.
- ESD protection: ±8 kV air and ±6 kV contact discharge.
Where to use it
Place the S105 next to your router, behind a TV unit or at a shop counter to connect wired devices. In a small CCTV setup it can link a DVR or NVR, a viewing computer and the router, so you can watch your cameras remotely. Fast Ethernet is enough for browsing, printing, point-of-sale systems and recorder viewing. For large file transfers or many IP cameras, choose a gigabit switch instead.
Installation and setup
Plug in the 5 V power adapter, connect one port to a LAN port on your router with an Ethernet cable, and connect your devices to the other ports. The Link/Act LEDs show which ports are active. Devices receive their network addresses from the router as normal. The switch can be screwed to a wall to keep it off the floor. Keep it indoors, within 0 to 45 °C.
What you need with it
- A router or existing network to connect to
- Cat5 or Cat5e (or better) Ethernet cables for each device
- A PoE switch or injector if you are powering IP cameras, as this switch does not supply PoE
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Does the Tenda S105 need any setup?
No. The S105 is an unmanaged, plug-and-play switch. Connect the power adapter and the network cables and it starts working. Each port detects the speed of the connected device and the cable type automatically, so a standard patch cable works in any port. There is no web page, app or password to manage.
Is the S105 a gigabit switch?
No. The S105 has Fast Ethernet ports that run at up to 100 Mbps. That is enough for internet browsing, printers, smart TVs and viewing a CCTV recorder. If you transfer large files between computers or connect many high-resolution IP cameras, choose a gigabit model such as the Tenda SG105 instead.
Can I connect IP cameras to it?
Yes. The S105 carries IP camera video like any other network data, but it does not supply power over the network cable. Power each camera with its own adapter, or use a PoE injector or PoE switch. Up to four cameras or other devices can connect while the fifth port links to your router or NVR.
Can I mount it on a wall?
Yes. Tenda states the S105 supports both desktop and wall mounting, but not rack mounting. Wall mounting keeps it off the floor and out of the way, for example behind a TV or in a small network corner. Keep it indoors and away from water, as it is rated for 0 to 45 °C.

