PVC Conduit Couplers 20 mm
A 20 mm PVC conduit coupler joins two lengths of 20 mm conduit end to end so cables stay protected along the whole run. It suits CCTV, alarm, electrical and network installers in Kenya who need a neat, continuous cable route on walls and ceilings.
- Joins two lengths of 20 mm PVC conduit
- Keeps cable runs continuous and tidy
- Straight joint for walls and ceilings
- Suits CCTV, alarm and electrical wiring
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 20mm PVC conduit coupler is a short sleeve that joins two lengths of 20 mm PVC conduit end to end. It lets you extend a cable route past the length of a single pipe without leaving a gap where dust, water or pests can reach the cable. At the Kefa CCTV Shop in Nairobi we stock them for installers and DIY buyers across Kenya.
What it does
Conduit is sold in fixed lengths, so almost every run needs at least one joint. The coupler slides over the ends of two pipes and holds them in line. Cables can then be pulled through the joined pipe as if it were one piece. Without a coupler, a join is usually untidy and the cable is exposed at the gap.
Key features
- Sized for 20 mm PVC conduit, so buy it together with 20 mm pipe
- Joins two pipes end to end in a straight line
- Keeps the cable route continuous and protected
- Light and easy to cut, fit and handle on site
Where to use it
In CCTV work, 20 mm conduit is a common choice for carrying camera cable from a junction box down a wall or across a ceiling. Couplers are used wherever the run is longer than one pipe, along a perimeter wall, a corridor or a long roof space. They are equally useful for alarm wiring, lighting circuits, data cable and speaker cable.
Installation and setup
- Cut both pipe ends square and remove any burrs so the cable does not snag
- Check the pipe and coupler are both 20 mm before fitting
- Slide the coupler over the end of one pipe, then push the second pipe in until the ends meet
- Where the manufacturer or your electrician advises it, fix the joint with PVC solvent cement
- Secure the pipes to the wall with clips either side of the joint so it does not pull apart
What you need with it
You will need 20 mm PVC conduit pipe, clips or saddles to hold it to the wall, and bends or junction boxes where the run changes direction. Pull the cable through before the final joint where you can, since long runs are easier to thread in sections. Kefa Solutions technicians can handle cable routing as part of a CCTV installation if you prefer not to do it yourself.
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What size conduit does this coupler fit?
It is sold as a 20 mm coupler, so it is meant for 20 mm PVC conduit. Do not mix it with 25 mm pipe, because the joint will not hold. If you are unsure which size you have, bring a piece of your pipe to the Kefa CCTV Shop on Moi Avenue, Nairobi and we will match it.
Do I need glue to fit a conduit coupler?
Many installers fit PVC conduit couplers with PVC solvent cement so the joint cannot pull apart, especially outdoors or where the pipe is under strain. For a dry indoor run, a firm push fit with clips either side is often enough. Follow the guidance of your installer or electrician for your site.
Can I use it for CCTV cable?
Yes. A coupler is simply a joint in the conduit, so it works for CCTV camera cable, power cable, alarm wiring and network cable alike. Make sure the finished pipe has enough room to pull the cables through without force.
Can I get it delivered outside Nairobi?
Yes. We deliver within Nairobi up to 45 km and send by courier across Kenya in 1 to 3 working days. You can also collect from our shop on Moi Avenue, Nairobi CBD. If you are unsure, ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi, and we will help you choose before you buy.