Hikvision 4-Port PoE Smart Managed Switch DS-3E1105P-EI/M
The Hikvision DS-3E1105P-EI/M is a smart managed switch with four 10/100 Mbps PoE ports and one uplink port, built for small IP CCTV systems. It shares a 45 W PoE budget across the cameras, reaches up to 300 metres in long-range mode and restarts frozen cameras automatically, which suits Kenyan homes, shops and offices.
- 4 × 10/100 PoE ports plus 1 uplink
- 45 W PoE budget, up to 30 W per port
- Long-range PoE up to 300 m
- PoE watchdog restarts unresponsive cameras
- VLAN, loop prevention and cable fault detection
- 6 kV surge protection, metal fan-free case
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The Hikvision 4 port PoE switch DS-3E1105P-EI/M powers up to four IP cameras, access points or other PoE devices over their network cables and links them to your NVR or router through a fifth uplink port. As a smart managed switch it adds monitoring and protection features that a basic PoE switch lacks, which makes small CCTV systems in Kenya easier to keep running.
Key features
- 4 PoE ports plus 1 uplink: four 10/100 Mbps PoE ports and one 10/100 Mbps RJ45 uplink.
- 45 W PoE budget: up to 30 W on a single port, supporting IEEE 802.3af and 802.3at devices.
- Long-range mode: PoE and data up to 300 metres on ports 1 to 4; Hikvision notes that results depend on the camera and cable.
- PoE watchdog: detects cameras that stop responding and restarts them automatically.
- Network tools: 802.1Q VLAN, STP/RSTP loop prevention, port isolation, link aggregation and cable fault detection.
- 6 kV surge protection: with a grounding terminal for better protection against lightning-induced surges.
- Metal, fan-free case: silent and compact, for desk or wall mounting.
Where to use it
Use it to add up to four IP cameras to an NVR that has no PoE ports, to extend a system to a distant gate or outbuilding, or to power cameras at a remote point of a compound and send their video back over one cable. The long-range mode helps on larger plots where the cable run to a camera goes past the usual 100 metres. The switch is rated to work from 0 °C to 40 °C, so mount it indoors or in a ventilated cabinet.
Installation and setup
Connect the cameras to ports 1 to 4 with Cat6 cable and the uplink port to your NVR, router or main switch, then power the switch with its adapter. It works out of the box; the smart features can be set up through the web interface, and installers can activate and manage it remotely through Hik-Partner Pro to see port status, PoE use and alarms. Connect the grounding terminal to earth where possible.
What you need with it
- Up to four PoE IP cameras or other PoE devices
- Cat6 network cable and RJ45 connectors
- An NVR, router or main switch for the uplink
Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or order for delivery within Nairobi or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
How many cameras can this switch power?
It has four PoE ports, so it powers up to four cameras or other PoE devices. The total PoE budget is 45 W, with up to 30 W on any one port. Many fixed IP cameras, such as Hikvision's Smart Hybrid Light models, draw under 8 W each, so four of them fit easily. Check the power rating of PTZ cameras or heated cameras before connecting them.
What is the 300 metre long-range mode?
Normal Ethernet is limited to about 100 metres per cable run. In long-range mode, ports 1 to 4 can carry PoE power and video up to 300 metres. Hikvision notes that the distance achieved depends on the camera model and the cable quality, so use good pure-copper Cat6 cable for long runs.
Is this switch managed or unmanaged?
It is a smart managed switch. It works straight out of the box like a simple switch, but you can also log in to set VLANs, port isolation, loop prevention and link aggregation, and use features such as PoE watchdog and cable fault detection. Installers can also manage it remotely through Hikvision's Hik-Partner Pro platform.
Can I use it with my NVR that already has PoE ports?
Yes. Connect the switch uplink to your network and the NVR, then plug extra cameras into the switch. This is useful when the NVR's own PoE ports are full or a group of cameras is far from the recorder. Make sure the NVR has free channels for the extra cameras.




