
Dahua Wireless Door Detector DHI-ARD323-W2
The Dahua DHI-ARD323-W2 is a slim wireless magnetic door and window detector for Dahua alarm systems. It uses a reed switch, an encrypted two-way radio link and one CR123A battery, with a quoted open-space range of up to 1,200 m. A neat entry-point sensor for homes and shops in Nairobi and across Kenya.
- Slim 100 x 20.8 x 20.3 mm body
- AES128 encrypted two-way radio
- Up to 1,200 m in open space
- Tamper alarm and low-battery detection
- One CR123A battery
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
The dahua wireless door detector DHI-ARD323-W2 is a slim magnetic door and window contact for Dahua wireless alarm systems. It reports to the alarm hub over an encrypted two-way radio link, runs on one CR123A battery and measures just 100 x 20.8 x 20.3 mm, so it fits discreetly on most doors in Kenyan homes, shops and offices.
Key features
- Reed-switch sensing: alarm when the magnet moves more than 40 mm away
- Two-way wireless link with AES128 encryption and frequency hopping
- Open-space communication distance of up to 1,200 m
- One CR123A battery, with a quoted life of up to 4 years on the normally open setting
- Tamper alarm, low-battery detection and test mode
- Slim body of 100.2 x 20.8 x 20.3 mm with bracket mounting
Where to use it
Use it on entrance doors, back doors, store-room doors, office doors and sliding windows. It protects the opening, so pair it with a PIR detector inside for movement coverage. It is made for indoor use at -10 to +55 degrees Celsius, so avoid fitting it where rain or heavy condensation reaches the door frame.
Installation and setup
Wireless sensors suit homes and shops where running cable is costly or messy. Fit the sensor, pair it with the Dahua wireless alarm hub, and use the hub's test mode to check signal strength before you fix it permanently. Keep the sensor indoors, away from damp, and fit a fresh CR123A battery. The detector also has an external input, so a wired contact can be connected to it and reported wirelessly; battery life is shorter when that input is set to normally closed or pulse mode. Fit the sensor on the frame and the magnet on the moving door or window, with a gap under 40 mm.
What you need with it
You need a compatible Dahua wireless alarm hub (the AirShield range) set to the same radio band as the sensor, one CR123A battery, and a screwdriver and fixings for the bracket. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. You can collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD. We deliver within Nairobi (up to 45 km) and send by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What does the Dahua ARD323-W2 detect?
It detects a door or window being opened. A reed switch in the sensor reacts when the magnet moves more than 40 mm away, and the detector then sends an alarm to the Dahua alarm hub. It does not detect movement in the room, so pair it with a PIR detector for full cover.
How long does the battery last?
Dahua quotes up to 4 years on one CR123A battery when the external input is normally open, and 2 years for normally closed or pulse input. The detector reports low battery to the hub, so you get a warning before it stops working.
Can I use it on a metal door?
It can be fixed to metal frames, but metal close to the sensor can weaken the radio signal. Place it where the hub can still reach it and run the hub's test mode to check signal strength before fixing it. Our team can advise on the best position for your door.
Does it work with any wireless alarm?
No. It works with Dahua wireless alarm hubs from the AirShield range, and the radio band must match the hub. This version is a 433 MHz unit. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi to confirm compatibility with your hub.