Dahua Model DH-PFB203W SKU KCS-DAHUA-PFB203W

Dahua PFB203W Wall Mount Bracket DH-PFB203W

KSh 1,500
In stock — pick up today in Nairobi CBD

The Dahua DH-PFB203W is a white wall mount bracket made of aluminium and SECC steel. It measures 160 x 122 x 76 mm, carries up to 1 kg, and is sold in Kenya for fixing compatible Dahua cameras, such as fisheye models, to a wall.

  • Original Dahua wall mount bracket
  • Aluminium and SECC steel, white finish
  • Supports up to 1 kg
  • 160 x 122 x 76 mm, 0.5 kg
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The Dahua PFB203W wall mount bracket is an original Dahua accessory for holding a camera away from a wall at the right angle. It is made from aluminium and SECC steel, finished in white, and is designed to take a load of up to 1 kg.

Key features

  • Aluminium and SECC steel construction
  • White finish that blends with most walls
  • Load capacity of 1 kg
  • Operates from -40 °C to +60 °C, below 90% humidity
  • Size 160 x 122 x 76 mm, weight 0.5 kg

Which cameras it fits

Dahua lists the PFB203W as an accessory for its IPC-EB5541-AS fisheye camera, and other models may also fit. Mounting hole patterns differ between models, so always confirm the camera model with our team before you buy. Mounts are not universal.

A camera plus bracket should stay under the 1 kg load rating, so heavy PTZ cameras need a different mount. Check the weight of your camera on its datasheet.

Fitting it

Fix the bracket to solid masonry, concrete or a steel surface with suitable wall plugs and screws, then attach the camera to the bracket plate and route the cable. Fittings for the wall are not part of what Dahua specifies, so use plugs that suit your wall. In Nairobi, check that outdoor fixings are corrosion resistant so that rust does not stain the wall.

Leave a loop of cable at the bracket so rain cannot run along the cable into the camera connector. Aim the camera, tighten the bracket joints firmly and then check the picture on screen before finishing.

Buying from the Kefa CCTV Shop

You can collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or we can deliver within Nairobi (up to 45 km). Orders elsewhere in Kenya go by courier and usually arrive in 1 to 3 working days. Call or visit before you buy if you want to check the unit against your existing equipment.

Frequently asked questions

Which Dahua cameras use the PFB203W bracket?

Dahua lists it as an accessory for the IPC-EB5541-AS fisheye camera. Fixing patterns differ between camera models, so we recommend telling us your exact camera model and we will confirm whether the bracket fits before you buy. Do not assume that all Dahua cameras use the same mount, even within one product family.

How much weight can the bracket hold?

Dahua rates the PFB203W for a load of 1 kg. Add the weight of the camera and any cable box or accessory, and keep the total under that figure. Heavier cameras, such as PTZ domes, need a stronger bracket designed for that camera, so ask us if you are unsure.

What is the bracket made of?

It is built from aluminium and SECC steel, which is electro-galvanised cold-rolled steel, and is finished in white. This gives a strong, light bracket that resists corrosion better than plain steel when it is used outdoors, though you should still use good fixings.

Can it be used outdoors?

Dahua specifies an operating temperature of -40 °C to +60 °C and humidity below 90% RH. It is used with outdoor cameras, but fit it with corrosion-resistant fixings and seal the cable entry so water cannot track along the cable.

KSh 1,500 In stock