Dahua Model DH-CS4226-24ET SKU KCS-DAHUA-CS4224-24ET

Dahua 26-Port Cloud Managed Switch with 24 PoE Ports DH-CS4226-24ET

KSh 38,000
In stock — pick up today in Nairobi CBD

The Dahua DH-CS4226-24ET is a 26-port cloud managed PoE switch with 24 PoE ports for IP cameras and two gigabit combo uplinks (RJ45 or SFP). It powers cameras up to 250 m away, restarts frozen cameras with PoE Watchdog and can be monitored from the DoLynk Care app, suiting larger CCTV systems in Kenya.

  • 24 PoE ports plus 2 gigabit RJ45/SFP uplinks
  • Long-distance PoE up to 250 m
  • PoE Watchdog restarts frozen cameras automatically
  • Cloud management with DoLynk Care app
  • Metal casing, desktop or rack mount
How our CCTV installation works, and what it costs ↗

Frequently bought together

Complete your setup in one go
Total for 4 items KSh 57,850
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

The Dahua 24 port PoE switch DH-CS4226-24ET is a 26-port cloud managed desktop switch built for CCTV. Ports 1–24 are 10/100 Mbps RJ45 ports with PoE output for IP cameras, and ports 25–26 are gigabit combo uplinks that take either a copper RJ45 cable or an SFP fibre module for the link to your NVR or main network.

Key features

  • 24 PoE ports supporting IEEE 802.3af, 802.3at, Hi-PoE and 802.3bt; ports 1–2 give up to 90 W, ports 3–24 up to 30 W.
  • Two gigabit combo uplinks (RJ45 10/100/1000 or SFP 1000 Mbps).
  • Long-distance PoE up to 250 m per port (link speed drops to 10 Mbps in this mode).
  • PoE Watchdog detects a camera that stops responding and restarts its port automatically.
  • Cloud management through the DoLynk Care app, plus web management, network topology view and real-time alarms.
  • Loop protection, port-based VLAN, 8.8 Gbps switching capacity.
  • Full metal casing with lightning protection (4 kV common mode); desktop or rack mount.

Where to use it

This switch suits medium and large IP camera systems in supermarkets, offices, hotels, schools, factories, apartment blocks and estates. One switch can power and connect up to 24 cameras, and the gigabit uplink carries all their video to the recorder. The high-power red ports can supply PTZ cameras or other demanding devices, and the 250 m mode helps reach cameras on far gates or perimeter walls without an extra switch.

Installation and setup

The switch has a built-in power supply and measures 440 × 220 × 44 mm, so it fits on a desk or in a standard rack. It runs from –10 °C to +55 °C; install it in a ventilated cabinet away from dust and direct sun. Connect cameras to ports 1–24, the NVR or core switch to port 25 or 26, and add the switch to the DoLynk Care app to watch port status, PoE use and alarms remotely. Check that the total power of all cameras is within the switch's PoE budget.

What you need with it

  • PoE IP cameras and a network video recorder with enough channels.
  • Cat6 cable; an SFP module and fibre for long uplinks between buildings.
  • A UPS sized for the switch and cameras to ride through power cuts.

Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, have it delivered within Nairobi (up to 45 km), or receive it by courier anywhere in Kenya in 1–3 working days.

Frequently asked questions

How many cameras can it power?

It has 24 PoE ports, one camera per port. Most fixed IP cameras draw well under 15 W, so a full set of 24 is usually possible, but you must keep the total within the switch's PoE budget, which is 240 W or 375 W depending on the version. PTZ cameras and cameras with heaters need more, so add up each camera's maximum power first.

What is long-distance PoE?

Standard Ethernet reaches 100 m. In long-distance mode, a port can power and connect a camera up to 250 m away, with the link speed reduced to 10 Mbps. That is enough for a single camera's video stream, and it saves fitting an extra switch and power point for a far gate or wall.

What does cloud managed mean?

You can add the switch to Dahua's DoLynk Care app and see port status, PoE power use, network topology and alarms from your phone or computer, even when you are away from site. The app also sends notifications when a fault occurs. It still works as a normal local switch if you do not connect it to the cloud.

Why are the uplinks only gigabit when the PoE ports are 10/100?

Each camera stream needs only a few megabits, so 100 Mbps per camera port is ample. The uplink carries all 24 cameras together to the recorder, so it runs at 1000 Mbps. The SFP option lets you use fibre for long uplinks between buildings, which also avoids lightning damage on outdoor copper runs.

KSh 38,000 In stock