Console Cable for Switches and Routers
A console cable connects a laptop to the console port of a managed switch, router, firewall or fibre OLT, so you can set it up or recover it through a terminal program. It is a standard tool in the bag of network engineers and installers in Kenya.
- Connects a laptop to a device console port
- For setup and recovery of managed equipment
- Works when the network settings are lost
- Essential tool for network installers
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A console cable gives you a direct line from your laptop to the management port of a network device. Managed switches, routers, firewalls and fibre OLTs usually have a console port for setup and emergencies, and it works even when the device has no network settings yet, or when a wrong setting has locked you out over the network.
When you need a console cable
- First setup of a new managed switch or router before it has an IP address
- Recovering a device after a forgotten password or a bad configuration
- Watching boot messages to diagnose a device that will not start properly
- Upgrading or reloading firmware where the maker asks for console access
Network engineers and ISP technicians around Nairobi keep a console cable in their bag at all times, because a site visit to a locked-out device is wasted without one.
Choose the right ends
The device end of a console cable is commonly an RJ45 plug that fits the console port, while the laptop end is either a USB plug or an older DB9 serial connector. Most laptops today have only USB ports, so a DB9 cable needs a USB-to-serial adapter. Some newer devices use a USB console port instead of RJ45, so check the port on your equipment first.
How to use it
- Connect the cable to the device console port and to your laptop.
- If it is a USB cable, install the driver for its USB-to-serial chip so the laptop shows a COM port.
- Open a terminal program, such as PuTTY on Windows or screen on Mac and Linux.
- Select the COM port and the serial settings from the device manual.
- Press Enter to bring up the device prompt.
Many devices use 9600 baud, 8 data bits, no parity and 1 stop bit, but always follow the manual for your equipment.
A console cable is not a network cable
Plugging a console cable into a normal network port will not work, and a normal network cable will not work in a console port. Keep the console cable labelled in your toolbag.
What you need with it
- A laptop with a terminal program
- A USB-to-serial adapter if the cable has a DB9 end
- The device manual or login details
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Does my switch need a console cable?
Only managed switches, routers, firewalls and similar devices have a console port. Simple unmanaged switches have no settings to change and no console port. If your device has a port marked Console, usually an RJ45 or USB port, a console cable lets you configure or recover it.
Why does my laptop not see the console cable?
USB console cables use a USB-to-serial chip that needs a driver. Install the correct driver, then check Device Manager on Windows for the new COM port number. Select that port in your terminal program. If nothing appears, try another USB port or reinstall the driver.
What settings do I use in the terminal program?
Use the serial settings given in the device manual. Many switches and routers use 9600 baud, 8 data bits, no parity, 1 stop bit and no flow control, but some use other speeds. If you see random characters on screen, the baud rate is usually wrong.



