SKU KCS-JBOX-100X100X70

CCTV Junction Box (Adaptor Box) 100 x 100 x 70 mm

KSh 300
In stock — pick up today in Nairobi CBD

A 100 x 100 x 70 mm CCTV junction box (adaptor box) that houses and tidies cable joints and connectors. It suits installers and shop owners across Kenya who need a box of this size for camera, power and network connections.

  • 100 x 100 x 70 mm CCTV adaptor box
  • Houses and tidies cable joints
  • Fixes to a wall or flat surface
  • For camera, power and network joints
  • Pickup from 3 Nairobi branches
  • Nairobi delivery from KSh 200 (KSh 50/km)
  • Countrywide courier in 1–3 working days
  • Pay by M-Pesa, cash or bank transfer

Overview

A cctv junction box 100x100x70 is an adaptor box that holds cable joints and connectors in one tidy place. This one is a small square box with more depth than the 85 x 85 x 50 mm size, sold as 100 x 100 x 70 mm. In CCTV work it sits behind a camera or on a wall along the cable route so joints are not left loose. The Kefa CCTV Shop in Nairobi stocks it for installers across Kenya.

What this size suits

At 100 mm square and 70 mm in its third dimension it gives a camera's power, video and network joints a little more space, and room for a short cable loop. It suits one camera, or two where the connectors are small.

It is a good first choice for a standard house or shop job where each camera has its own joint box. Check that a power plug and a video or network connector will sit side by side, and leave slack so the lid closes without strain.

Before buying the 100 x 100 x 70 mm box, measure the connectors, plugs and cable bends you plan to house, and remember the inside is a little smaller than the outside. Bring a sample to the Kefa CCTV Shop on Moi Avenue, Nairobi and we will help you confirm the fit.

Key features

  • External size stated as 100 x 100 x 70 mm
  • Adaptor box for housing cable joints and connectors
  • Fixes to a wall or flat surface
  • Cables enter where the run reaches the box

Typical uses

  • Joints for one or two cameras
  • Cable splice on a pole or wall
  • Behind a bullet camera mounted on a bracket

Installation and setup

  • Mark the fixing holes and fix the box firmly with screws and plugs
  • Bring cables in from below or the side where possible
  • Make and tidy the joints, then close the lid fully
  • For outdoor use, choose a sealed box and seal cable entries

What you need with it

Bring screws, wall plugs, connectors and sealant for cable entries. Kefa Solutions technicians can install CCTV cameras and fit the boxes as part of the job. Collect from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or ask about delivery within Nairobi and by courier across Kenya.

Frequently asked questions

How does this differ from the 85 x 85 x 50 mm box?

It is larger in every direction, so there is space for bulkier connectors and a short spare cable loop. Choose the smaller one only where wall space is very tight. If you are unsure, ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi, and we will help you choose before you buy.

Will a camera base sit on it?

That depends on the camera. Some small bullet camera bases are about this size, but many are not. Check the base of your camera against the box, or bring the camera to our shop. You can collect from the shop in Nairobi CBD or have it delivered within Nairobi or by courier across Kenya.

Can I use it outdoors?

Many installers use junction boxes outdoors. For outdoor use, choose a sealed box, enter cables from below and seal the cable entries. Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi about the unit in stock before using it in rain.

KSh 300 In stock