8-Port Reverse PoE Switch
A reverse PoE switch is a network switch that takes its power from the devices at the other end of its network cables, instead of from a wall socket. This 8-port model suits apartment blocks and estates in Kenya where the switch sits in a stairwell, riser or roof with no mains power.
- Powered from the user end over network cable
- No socket needed at the switch
- Eight ports for flats or users
- Suits stairwells, risers and estate boxes
Frequently bought together
Complete your setup in one go- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A reverse PoE switch turns the usual PoE idea around. A normal PoE switch sends power out to cameras and access points. A reverse PoE switch receives its power over the network cables from the user end, usually from PoE injectors placed at the subscribers' homes. That means it can sit where there is no socket at all.
Where reverse PoE is used
The design comes from building fibre and estate networks, and suits places such as:
- A stairwell or riser cupboard in an apartment block, serving the flats on that floor
- A distribution box on an estate wall or pole
- A rooftop or ceiling space far from any socket
- Any shared point where running a mains supply would be costly or untidy
In Nairobi apartment blocks, internet providers and estate network operators often bring fibre to a box on each floor. A reverse PoE switch in that box links the fibre equipment to the flats over network cable, and each flat's connection helps to power it.
How it gets its power
The switch takes power from one or more connected ports, fed by injectors at the user end. Because its power comes from the users, it stays up while powered user lines are active, and models differ in how they share the load between those lines. The exact rules, such as which ports accept power and what voltage they need, differ between models, so check the details for this unit before connecting injectors.
Installation and setup
- Mount the switch in the distribution box or riser, protected from dust and water.
- Run network cable from each port to the flats or users.
- Fit the correct PoE injector at the user end of each powered line.
- Connect the uplink to the fibre equipment or upstream network.
- Check link lights on each port once power arrives.
Use the right injector
Reverse PoE depends on the correct injector type and voltage. A wrong injector may fail to power the switch or may damage equipment, so never mix injector types on one switch.
What you need with it
- PoE injectors for the user ends
- Network cable and RJ45 connectors for each run
- An uplink from fibre equipment or another switch
- A lockable distribution box
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
What is a reverse PoE switch?
It is a switch that receives its power over the network cables from the user end, instead of from a mains socket. Injectors at the users' end feed power up the cable. This lets the switch sit in stairwells, risers and estate boxes where there is no socket.
Can I use a reverse PoE switch to power my IP cameras?
No. A reverse PoE switch is designed to receive power, not to supply it to cameras in the usual way. For powering IP cameras, use a normal PoE switch or PoE injectors. Reverse PoE switches are for distribution points in apartment and estate networks.
What happens when a user switches off their router?
The switch draws power from whichever powered user lines are active, so one user switching off does not normally bring it down while other powered lines remain. How it shares power between lines, and how many it needs, depends on the model, so check the details of this unit when planning a building.




