24-Port Patch Panel
A 24 port patch panel is the panel in a data cabinet where network cables from wall points and cameras are terminated. Short patch leads then connect each port to a switch. It keeps cabling tidy, protected and easy to change, in offices, schools and IP CCTV systems across Kenya.
- Terminates 24 network cable runs
- Protects fixed cabling in the walls
- Quick moves with short patch leads
- Pairs port for port with a 24-port switch
- Pickup from 3 Nairobi branches
- Nairobi delivery from KSh 200 (KSh 50/km)
- Countrywide courier in 1–3 working days
- Pay by M-Pesa, cash or bank transfer
Overview
A 24 port patch panel is where the fixed network cables in a building end inside the data cabinet. Each cable from a wall point, access point or IP camera is punched down on the back of the panel. On the front, short patch leads connect each panel port to a port on the switch. The panel protects the long cables and turns the cabinet into a neat, labelled hub.
Why use a patch panel
- The solid-core cables in the walls are never plugged and unplugged directly
- Moves and changes take seconds: you swap a patch lead, not a cable
- Every cable run can be labelled and tested at one place
- The cabinet stays tidy, so faults are easier to find
What 24 ports suits
Twenty-four ports suit a small to medium office, a school block, a clinic, or an IP CCTV system with many cameras and network points. It pairs naturally with a 24-port switch, port for port. In many Nairobi offices, one 24-port panel and one switch in a wall cabinet serve the whole floor.
If you expect more than 24 cable runs, plan for a second panel and allow cabinet space for it now.
Installation and setup
- Mount the panel in the data cabinet, usually above the switch.
- Bring each cable in from the back, keeping the bundle neat with ties or a cable manager.
- Strip each cable and punch the conductors down in the colour order of your chosen wiring standard.
- Use the same standard at the wall point or camera end.
- Test every run with a cable tester, then label the port and the wall point.
Match the cable category
Use a panel that matches the category of the cable you have installed, so the whole link performs as intended.
What you need with it
- A data cabinet with free space for the panel
- A punch-down tool and a cable tester
- Short patch leads, one per port in use
- A cable manager and a switch with enough ports
Ask our team at the Kefa CCTV Shop on Moi Avenue, Nairobi for the exact specification of the unit in stock. Collect it from the Kefa CCTV Shop on Moi Avenue, Nairobi CBD, or have it delivered within Nairobi (up to 45 km) or by courier across Kenya in 1 to 3 working days.
Frequently asked questions
Why not plug the cables straight into the switch?
Building cables are usually solid-core and not made to be flexed and re-plugged. Ending them on a patch panel protects them and lets you make changes with short, flexible patch leads. It also keeps the cabinet tidy and makes every run easy to label and test.
What tool do I need to fit a patch panel?
A punch-down tool to press each conductor into the terminals on the back, a cable stripper, and a cable tester to check each run afterwards. Cable ties and a cable manager help keep the bundle neat. Follow the colour order printed on the panel for your chosen standard.
Does a 24-port patch panel fit my cabinet?
Patch panels mount on the rails of a data cabinet. Check that your cabinet has free height for the panel and room behind it for the cables. Plan the full layout, including the switch, cable manager and PDU, before mounting anything.

